Salata Caesar este una dintre cele mai faimoase salate din lume. Si ca orice salata respectabila are propria ei bucatica de istorie. Povestea incepe in America anilor ’20 in restaurantul lui Caesar Cardini, un imigrant italian care avea restaurante in Mexic si America. Conform fiicei lui Cardini, acesta a inventat reteta dupa ce aglomeratia de 4 iulie i-a golit bucataria de ingrediente si a trebuit sa se descurce cu ce avea la indemana pentru a servi in continuare mesenilor.

Sursa: youtube.com

Se pare ca reteta initiala continea felii de salata, oua si ulei de masline, iar Cardini era impotriva folosirii fileului de ansoa in salata sa. Astazi exista multiple feluri de Salata Caesar ele continand file de ansoa, crutoane, capere, pui si alte ingrediente.

Instructions

De foarte mult timp, laptele a fost considerat o bautura miraculoasa cu beneficii extraordinare pentru sanatate. Insa combinatia pe care o vom prezenta mai jos nu este doar miraculoasa, ci magnifica.

Principalul ingredient din aceasta reteta este turmericul. Turmericul contine curcumina, polifenol identificat a fi componenta activa primara si care prezinta peste 150 de activitati potential terapeutice, ce includ beneficii antioxidante, anti-inflamatorii si anti-cancer.

Beneficii suplimentare: CITESTE IN CONTINUARE

Sursa video: youtube.com

Sursa articol: secretele.com

Three Methods: Necklace, Bracelet, Earrings

Buying jewelry, even costume jewelry, can be expensive. Knowing how to make handmade jewelry means more than making nice pieces at lower costs, but also closely matching the style to your personal taste. By learning a few basic techniques, you should be able to construct unique styles of jewelry sets, necklaces, bracelets, earrings and more.

Steps

1. 
   1. Gather all the necessary tools and supplies.
2. 
   2. Begin using your creative abilities! Take your stringing material and add all types of elements to your project!

Method 1 of 3: Necklace

Here is just an example of a design layout:

1. Arrange beads in the grooves of the beading design board in the following pattern:
    5 pearls, 1 spacer, 1 bicone crystal, 1 spacer. Repeat the pattern until you have reached the marks for an 18-inch design (45.72 cm).

1.  
   1. Using wire cutters, cut a 20-inch (50.8 cm) piece of beading wire.
2. 
   2. Thread 1 end of the wire through a crimp tube, then through one side of a clasp. Pass the wire back through the crimp tube, leaving about 1/2 inch and close the tube with the crimping pliers.
3. 
   3. Starting at one end of your design layout, begin stringing the beads from the board onto the wire, threading the wire tail from the crimp through the first 3-4 beads.
4. 
   4. Thread a crimp tube and the other half of the clasp on the wire. Go back through the crimp tube and the last 3-4 beads. Pull the wire until it is close to the edge of the crimp tube; it may be easier to do this with chain-nose pliers. Close the tube with the crimping tool. Trim any loose wire ends with the flush-cutters.

Method 2 of 3: Bracelet

1. 
   1. Arrange beads on the beading board for a 6 to 7-inch bracelet, depending on the size of your wrist (15.24 cm to 17.78 cm).
   Use this pattern: 2 pearls, 2 spacers, 2 pearls, 1 spacer, 1 bicone crystal, 1 spacer. Repeat until you have reached the desired length.
2. 
   2. Thread the crimp tube and one side of the toggle clasp on a 9-inch piece of beading wire.
   Go back through the tube and close it with the crimping tool.
3. 
   3. String the beads onto the wire.
4. 
   4. Add another crimp tube and the other part of the clasp. Return through the crimp and close it.

Method 3 of 3: Earrings

1. 
   1.On each of 4 headpins, string 1 pearl, 1 spacer, 1 bicone crystal, 1 spacer and 1 pearl.
   On 2 headpins, string 2 pearls, 1 spacer, 1 bicone crystal, 1 spacer and 2 pearls.
2. 
   2.Make an open loop just above the last bead on each headpin.

   • Use the chain-nose pliers to bend the headpin to a 90-degree angle.
   • Grasp the wire at the bend with the round-nose pliers and bend the tail around the jaw of the pliers with your finger.
   • Cut away the extra wire with the flush-cutters.
3. 
   3.Open a jump ring and add 1 short element, 1 long element and 1 short element. Slide the jumpring through the earring finding and close the jumpring. Repeat with the remaining headpin elements and wire or clip-ons.

Video

Sursa: youtube.com

 

 

 

Tips

• Now that you know the basics of how to make handmade jewelry, you might add the dangles from the earrings to your necklace for an added design piece or make similar but shorter ones to dangle between the beads on your bracelet.
• You can use the same steps for adding crimps and clasps to any beaded jewelry. Arrange the beads on the board until you have a pattern you like, then add them to the wires. Use 2- or 3-strand spacers to make multi-strand necklaces or bracelets. Use the same patterns designed for bracelets to make an anklet by extending its length to fit your foot.

Things You will Need

• Beading design board
• 4mm to 6mm pearl beads
• 4mm to 6mm bicone crystals
• Gold or silver spacers
• Either 19- or 49-strand flexible beading wire
• Flush-cut wire cutters
• Crimp tubes
• Toggle clasps
• Crimping tool
• Head pins
• Chain-nose pliers
• Round-nose pliers
• Jump rings
• Earring wires or clip-ons

Sursa: wikihow.com

https://www.youtube.com/watch?v=fRwEPgmkeW0

https://www.youtube.com/watch?v=6pjn6XQisEM

Sursa: youtube.com

I have always worn a sport shoes and now when i saw this video i’m so amazed. Have you ever noticed those extra shoelace holes on your sports and running shoes and did you ever thought for what they are? What is purpose? I have noticed them but i never get some idea for what exactly they are. Usually those extra holes stay unused and that is. Just for that reason , a company that sells LED accessories for runners and cyclists has explained the reason and the brilliant purpose of those extra holes.The extra holes can be used to prevent blisters on your heels and stop your feet from cramming forward into the front of the shoe. So now watch the video and learn exactly what those holes are there and how to use them in the future. We hope that you will love this awesome video. Enjoy!

Sursa: allforfashiondesign.com

Sursa video: youtube.com

We all know that the homemade always tastes better. Making ice cream at home is one of the easiest and most fun food projects for kids to help out with or make on their own. This is really amazing recipe and it really tastes yummy.

For making this cool ice cream you will need milk, cream, sugar, vanilla extract, salt, sprinkles if you like, a measuring bowl, measuring cups, an ice cube tray, a large freezer bag, a small plastic bag, and winter gloves. Probably most of these ingredients and supplies you already have it around the house and with all these things you can have ice cream done in less than 15 minutes. Watch the amazing tutorial and enjoy!

Sursa: http://worldinsidepictures.com

Sursa video: youtube.com

Aceasta este una dintre cele mai vechi metode de a face tavane, folosind var si mortar, numita metoda ,,terasă Madras”.
Pastreaza racoare în interiorul chiar în timp ce pe partea de ieșire este prea cald; vă veți simți ca sunteti într-o cameră cu aer condiționat.

Sursa: youtube.com

Sursa: youtube.com

Sursa: youtube.com

Un proiect extrem de frumos: cum sa iti faci singur/a punguțele de cadouri cu doar doua ingrediente: o foaie colorata si putin lipici lichid. Pentru decorare vei avea nevoie de o panglica colorata (indicat este sa nu fie in aceeași nuanță cu cea a hârtiei).

Sursa: youtube.com

Alternativa pentru zi:

Sursa: youtube.com

Alternativa pentru noapte:

Sursa: youtube.com